Imam Sata-II disk napajne
- Ustvarjalec teme zakajaltersuxu
- Začetni datum
OS je Win XP + SP2 (32bit)
driverje za na disketnik sem si potegnu tukaj dol
( http://www.ecs.com.tw/ECSWebSi...=52&LanID=0 )
ko zaženem Setup pritisnem F6 in nato potrdim da bi naloži iz diskete:
Mi najprej napiše:
Setup could not determine the type of one or more mass storage devices installed on your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices:
<none> (Tukaj bi moralo biti ime trdega diska Hitachi?)
*To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S.
*If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage device for use with Windows, press ENTER.
pritisnem S:
izberem za Windows XP,
prebere disketo in mi napiše:
File \winXP\viasraid.sys caused an unexpected error (1024) at line 2113 in
d:\xpsprtm\base\boot\setup\oemdisk.c
Ma kaj zdaj moram narest, da mi bo zaznalo sata disk, moram naložit te driverje ali ne, in če ali bo moral še kaj prej v BIOSu spremenit.
če, rabite še kšno informacijo, pa kr vprašajte, ker jest jih rabim še bolj
driverje za na disketnik sem si potegnu tukaj dol
( http://www.ecs.com.tw/ECSWebSi...=52&LanID=0 )
ko zaženem Setup pritisnem F6 in nato potrdim da bi naloži iz diskete:
Mi najprej napiše:
Setup could not determine the type of one or more mass storage devices installed on your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices:
<none> (Tukaj bi moralo biti ime trdega diska Hitachi?)
*To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S.
*If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage device for use with Windows, press ENTER.
pritisnem S:
izberem za Windows XP,
prebere disketo in mi napiše:
File \winXP\viasraid.sys caused an unexpected error (1024) at line 2113 in
d:\xpsprtm\base\boot\setup\oemdisk.c
Ma kaj zdaj moram narest, da mi bo zaznalo sata disk, moram naložit te driverje ali ne, in če ali bo moral še kaj prej v BIOSu spremenit.
če, rabite še kšno informacijo, pa kr vprašajte, ker jest jih rabim še bolj
Imaš sploh .oem fajl na tej disketi? Ta file je obvezen, da lahko sploh prebere, za kater kontroler gre.
Downloadaj si driverje za tvojo mapo, jih razpakiraj in poberi ven driverje za kontroler in jih daj na sformatirano disketo.
Če ne, pa v BIOS-u poglej, če obstaja kje SATA native mode in ga daj na disabled. Takrat bi moral delat kot navaden PATA disk preko SATA kontrolerja.
Downloadaj si driverje za tvojo mapo, jih razpakiraj in poberi ven driverje za kontroler in jih daj na sformatirano disketo.
Če ne, pa v BIOS-u poglej, če obstaja kje SATA native mode in ga daj na disabled. Takrat bi moral delat kot navaden PATA disk preko SATA kontrolerja.
disk je tale: http://www.enaa.com/oddelki/racunalnistvo/izd_478_710199_Hitachi_SATA_2_1000GB_7200rpm_32MB
Jumperjev pa nima.
Glej, kaj sem našel na enem od tujih forumov:
SATA 2 (SATA 300) is not backwards compatible with a SATA (SATA 150) controller. In order to use a SATA 2 drive on a SATA (SATA 1?) controller, the hard drive must have a jumper position to restrict it to using SATA (SATA 150), and a jumper must be installed. Some drives have the jumper position available (e.g. some recent Samsung), some don't (e.g. some recent Maxtor).
This information can also probably be easily found on your hard drive manufacturer's web site.
If your drive does not have the jumper position available, you must return it and get a SATA 2 one that does, or a SATA drive.
SATA 2 (SATA 300) is not backwards compatible with a SATA (SATA 150) controller. In order to use a SATA 2 drive on a SATA (SATA 1?) controller, the hard drive must have a jumper position to restrict it to using SATA (SATA 150), and a jumper must be installed. Some drives have the jumper position available (e.g. some recent Samsung), some don't (e.g. some recent Maxtor).
This information can also probably be easily found on your hard drive manufacturer's web site.
If your drive does not have the jumper position available, you must return it and get a SATA 2 one that does, or a SATA drive.
Evo ti še članek in Wikipedie
http://en.wikipedia.org/wiki/Serial_ATA
in citat iz njega:
Backward compatibility between SATA 1.5 Gbit/s controllers and SATA 3.0 Gbit/s devices was important, so SATA/300's autonegotiation sequence is designed to fall back to SATA/150 speed (1.5 Gbit/s rate) when in communication with such devices. In practice, some older SATA controllers do not properly implement SATA speed negotiation. Affected systems require the user to set the SATA 3.0 Gbit/s peripherals to 1.5 Gbit/s mode, generally through the use of a jumper.[3] Chipsets known to have this fault include the VIA VT8237 and VT8237R south bridges, and the VIA VT6420 and VT6421L standalone SATA controllers.[4] SiS's 760 and 964 chipsets also initially exhibited this problem, though it can be rectified with an updated SATA controller ROM.
Ti imaš na plati VIA VT8237 south bridge in zato imaš sranje. Diska brez omejitvenega jumperja tvoja plata žal ne bo prepoznala.
http://en.wikipedia.org/wiki/Serial_ATA
in citat iz njega:
Backward compatibility between SATA 1.5 Gbit/s controllers and SATA 3.0 Gbit/s devices was important, so SATA/300's autonegotiation sequence is designed to fall back to SATA/150 speed (1.5 Gbit/s rate) when in communication with such devices. In practice, some older SATA controllers do not properly implement SATA speed negotiation. Affected systems require the user to set the SATA 3.0 Gbit/s peripherals to 1.5 Gbit/s mode, generally through the use of a jumper.[3] Chipsets known to have this fault include the VIA VT8237 and VT8237R south bridges, and the VIA VT6420 and VT6421L standalone SATA controllers.[4] SiS's 760 and 964 chipsets also initially exhibited this problem, though it can be rectified with an updated SATA controller ROM.
Ti imaš na plati VIA VT8237 south bridge in zato imaš sranje. Diska brez omejitvenega jumperja tvoja plata žal ne bo prepoznala.
Ok, diska, če ni SATA I oz. če nima jumperjev za 1.5 ne morem dat na to plato.
Kaj pa če kupim PCI kartico s SATA II vtiči?
hvala in lp
Kaj pa če kupim PCI kartico s SATA II vtiči?
hvala in lp
Našel sem še en disk v istem cenovnem razredu.
http://www.enaa.com/oddelki/racunalnistvo/izd_478_710202_Seagate_S-ATA_1TB_7200rpm_32MB_Cache
Za naložit XPeje pa bom še vedno potreboval driverje. Ima pa SATA I priklop, torej ga bom samo priklopil na mojo plato in ga bo zaznalo?
http://www.enaa.com/oddelki/racunalnistvo/izd_478_710202_Seagate_S-ATA_1TB_7200rpm_32MB_Cache
Za naložit XPeje pa bom še vedno potreboval driverje. Ima pa SATA I priklop, torej ga bom samo priklopil na mojo plato in ga bo zaznalo?
Citat:
Uporabnik zakajaltersuxu pravi:
Našel sem še en disk v istem cenovnem razredu.
http://www.enaa.com/oddelki/racunalnistvo/izd_478_710202_Seagate_S-ATA_1TB_7200rpm_32MB_Cache
Za naložit XPeje pa bom še vedno potreboval driverje. Ima pa SATA I priklop, torej ga bom samo priklopil na mojo plato in ga bo zaznalo?
Večina Seagate diskov ima možnost izbire med 3 in 1.5 delovanje. Jumper je ponavadi priložen...
Podobne teme
