kako to misliš, kot prva vgradnja? kar nachbau lahko imaš kaj češ (kao).
jaz sem nach kupil, kao predprogramirane za w212 mopf za letni komplet. Senzorji delajo (preverili pri nekem vulkanizerju), ampak jih avto ne prepozna.. povsem prebranem soočitno "slabo" preprogramirani. Tako da bi poskusil (če se sploh) dajo na novo programirat za dotični model. Sam avto nima nobene funkcije razen reset če pade v "loop"....takrat ko jih ne prepozna.
Preden jih stran vrzem bi se pač še malo poigral s tem. zato.
Ne vem, če prav razmišljam.
Reset Air Pressure
Ensure all tyres are inflated to the pressure listed on the tyre placard.
Turn the ignition to the ON position (engine off).
Press forward/back button on steering wheel until trip and odometer are displayed.
Press UP/DOWN button until TYRE INFLATION MONITOR is displayed.
Hold down the reset button (located on instrument cluster) until MONITOR CURRENT TYRE PRESSURE is displayed.
Press + button, TYRE PRESS. MONITOR-ACTIVATED!-PRESS. DISPLAY AFTER DRIVING A FEW MINS. is displayed.
If REACTIVATE-TYRE PRESS. MONITOR! appears, repeat relearn procedure.
If TYRE PRESSURE-CHECK TYRES! appears, indicates tyre pressure too low, adjust pressures accordingly.